Salve a tutti,
da circa qualche giorno sto provando a configurare il PAP2T per l'utilizzo della sola connessione PSTN, pur avendo provato molte configurazione ed aver letto non so quanti post sull'argomento non sono riuscito ad utilizzare tale dispositivo come vorrei.
Chiamando gli interni tutto funziona perfettamente, ma se provo ad effettuare una chiamata verso l'esterno ricevo l'errore 404, ovvero, non riesco a raggiungere l'indirizzo del PAP2T
10.10.10.120 ==> centralino 3CX ver.5.1.4128.0
10.10.10.150 ==> PAP2T
101 == > interno chiamante
LOG:
10:14:55.031 Call::Terminate [CM503008]: Call(5): Call is terminated
10:14:54.984 Call::RouteFailed [CM503014]: Call(5): Attempt to reach [sip:[email protected]:5060] failed. Reason: Not Found
10:14:54.968 CallLeg:
nFailure [CM503003]: Call(5): Call to sip:[email protected]:5060 has failed; Cause: 404 Not Found; from IP:10.10.10.150:5060
10:14:54.921 MediaServerReporting::SetRemoteParty [MS210002] C:5.2:Offer provided. Connection(transcoding mode): 10.10.10.120:7210(7211)
10:14:54.906 CallCtrl:nSelectRouteReq [CM503004]: Call(5): Calling: PSTNline:10000@[Dev:sip:[email protected]:5060]
10:14:54.875 MediaServerReporting::SetRemoteParty [MS210000] C:5.1:Offer received. RTP connection: 10.10.10.10:7092(7093)
10:14:54.875 CallCtrl:nSelectRouteReq [CM503010]: Making route(s) to [sip:[email protected]:5060]
10:14:54.875 CallLeg::setRemoteSdp Remote SDP is set for legC:5.1
10:14:54.875 Extension:
rintEndpointInfo [CM505001]: Ext.101: Device info: Device Identified: [Man: 3CX Ltd.;Mod: 3CX VoIP Client;Rev: 1] Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [3CX Phone v0.1] Transport: [sip:10.10.10.120:5060]
10:14:54.859 CallCtrl:nIncomingCall [CM503001]: Call(5): Incoming call from Ext.101 to [sip:[email protected]:5060]
10:14:54.843 CallLeg:nNewCall [CM500002]: Info on incoming INVITE:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.10.10.10:5060;branch=z9hG4bK-d87543-d018a7633b40472b-1--d87543-;rport=5060
Max-Forwards: 70
Contact: [sip:[email protected]:5060]
To: [sip:[email protected]:5060]
From: "3CXPhone"[sip:[email protected]:5060];tag=08009c63
Call-ID: YmUyYTE5NzAxZTI2ZWNkMzc4MTFjYWJjODhjNGMwYWI.
CSeq: 2 INVITE
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, NOTIFY, REFER
Proxy-Authorization: Digest username="101",realm="3CXPhoneSystem",nonce="12849614094:031e3ac8741f8c88789bfe4ed93db8cf",uri="sip:[email protected]:5060",response="080fa65307ab042800b5523947cf947c",algorithm=MD5
Supported: replaces
User-Agent: 3CX Phone v0.1
Content-Length: 0
Spero possiate aiutarmi, perchè non so più cosa fare.
Grazie in anticipo per la vs. disponobilità
Frank.
Bye. ;-)
da circa qualche giorno sto provando a configurare il PAP2T per l'utilizzo della sola connessione PSTN, pur avendo provato molte configurazione ed aver letto non so quanti post sull'argomento non sono riuscito ad utilizzare tale dispositivo come vorrei.
Chiamando gli interni tutto funziona perfettamente, ma se provo ad effettuare una chiamata verso l'esterno ricevo l'errore 404, ovvero, non riesco a raggiungere l'indirizzo del PAP2T
10.10.10.120 ==> centralino 3CX ver.5.1.4128.0
10.10.10.150 ==> PAP2T
101 == > interno chiamante
LOG:
10:14:55.031 Call::Terminate [CM503008]: Call(5): Call is terminated
10:14:54.984 Call::RouteFailed [CM503014]: Call(5): Attempt to reach [sip:[email protected]:5060] failed. Reason: Not Found
10:14:54.968 CallLeg:
nFailure [CM503003]: Call(5): Call to sip:[email protected]:5060 has failed; Cause: 404 Not Found; from IP:10.10.10.150:506010:14:54.921 MediaServerReporting::SetRemoteParty [MS210002] C:5.2:Offer provided. Connection(transcoding mode): 10.10.10.120:7210(7211)
10:14:54.906 CallCtrl:
nSelectRouteReq [CM503004]: Call(5): Calling: PSTNline:10000@[Dev:sip:[email protected]:5060]10:14:54.875 MediaServerReporting::SetRemoteParty [MS210000] C:5.1:Offer received. RTP connection: 10.10.10.10:7092(7093)
10:14:54.875 CallCtrl:
nSelectRouteReq [CM503010]: Making route(s) to [sip:[email protected]:5060]10:14:54.875 CallLeg::setRemoteSdp Remote SDP is set for legC:5.1
10:14:54.875 Extension:
rintEndpointInfo [CM505001]: Ext.101: Device info: Device Identified: [Man: 3CX Ltd.;Mod: 3CX VoIP Client;Rev: 1] Capabilities:[reinvite, replaces, able-no-sdp, recvonly] UserAgent: [3CX Phone v0.1] Transport: [sip:10.10.10.120:5060]10:14:54.859 CallCtrl:
nIncomingCall [CM503001]: Call(5): Incoming call from Ext.101 to [sip:[email protected]:5060]10:14:54.843 CallLeg:
nNewCall [CM500002]: Info on incoming INVITE:INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.10.10.10:5060;branch=z9hG4bK-d87543-d018a7633b40472b-1--d87543-;rport=5060
Max-Forwards: 70
Contact: [sip:[email protected]:5060]
To: [sip:[email protected]:5060]
From: "3CXPhone"[sip:[email protected]:5060];tag=08009c63
Call-ID: YmUyYTE5NzAxZTI2ZWNkMzc4MTFjYWJjODhjNGMwYWI.
CSeq: 2 INVITE
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, NOTIFY, REFER
Proxy-Authorization: Digest username="101",realm="3CXPhoneSystem",nonce="12849614094:031e3ac8741f8c88789bfe4ed93db8cf",uri="sip:[email protected]:5060",response="080fa65307ab042800b5523947cf947c",algorithm=MD5
Supported: replaces
User-Agent: 3CX Phone v0.1
Content-Length: 0
Spero possiate aiutarmi, perchè non so più cosa fare.
Grazie in anticipo per la vs. disponobilità
Frank.
Bye. ;-)
