[RISLTO] Patton 4112 : busy in uscita

[anonymous]

salve, il problema è scritto nel titolo, purtroppo.
In entrata sembra che il routing lo fa correttamente, in uscita no...
vi allego gentilmente la configurazione che esce dall'export del patton:
#

#
# #
# SN4112/JO/EUI #
# R5.7 2011-11-09 H323 SIP FXS FXO #
# 2012-03-14T15:42:19 #
# SN/00A0BA06EC74 #
# Generated configuration file #
# #
#

#

cli version 3.20
clock local default-offset +00:00
webserver port 80 language en
sntp-client
sntp-client server primary 129.132.2.21 port 123 version 4

system

ic voice 0
low-bitrate-codec g729

profile ppp default

profile call-progress-tone defaultDialtone
play 1 200 425 0
pause 2 200
play 3 600 425 0
pause 4 1000

profile call-progress-tone defaultBusytone
play 1 200 425 -7
pause 2 200

profile tone-set default

profile voip default
codec 1 g711alaw64k rx-length 20 tx-length 20
codec 2 g711ulaw64k rx-length 20 tx-length 20
codec 3 g729 rx-length 20 tx-length 20
fax transmission 1 relay t38-udp

profile pstn default

profile sip default
no autonomous-transitioning

profile aaa default
method 1 local
method 2 none

context ip router

interface eth0
ipaddress 192.168.1.4 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

context cs switch
no digit-collection timeout

interface sip IF_SIP_0
bind context sip-gateway GW_SIP_0
route call dest-interface IF_FXO_0
remote 192.168.1.10 5060
early-connect
early-disconnect
address-translation outgoing-call request-uri user-part fix 10001 host-part to-header target-param none

interface sip IF_SIP_1
bind context sip-gateway GW_SIP_1
route call dest-interface IF_FXO_1
remote 192.168.1.10 5060
early-connect
early-disconnect
address-translation outgoing-call request-uri user-part fix 10002 host-part to-header target-param none

interface fxo IF_FXO_0
route call dest-interface IF_SIP_0
loop-break-duration min 60 max 1000
disconnect-signal loop-break
disconnect-signal busy-tone
ring-number on-caller-id
mute-dialing

interface fxo IF_FXO_1
route call dest-interface IF_SIP_1
loop-break-duration min 60 max 1000
disconnect-signal loop-break
disconnect-signal busy-tone
ring-number on-caller-id
mute-dialing

context cs switch
no shutdown

authentication-service AS_ALL_LINES
realm 1 3CXPhoneSystem
username 10001 password dZ8edXkjFnM= encrypted
username 10002 password iAaKwKfxX4Q= encrypted

location-service LS_10001
domain 1 192.168.1.10

identity-group default

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 10001

identity 10001

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES

registration outbound
registrar 192.168.1.10 5060
lifetime 300
register auto

location-service LS_10002
domain 1 192.168.1.10

identity-group default

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 10002

identity 10002

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES

registration outbound
registrar 192.168.1.10 5060
lifetime 300
register auto

context sip-gateway GW_SIP_0

interface LAN
bind interface eth0 context router port 5060

context sip-gateway GW_SIP_0
bind location-service LS_10001
no shutdown

context sip-gateway GW_SIP_1

interface LAN
bind interface eth0 context router port 5062

context sip-gateway GW_SIP_1
bind location-service LS_10002
no shutdown

port ethernet 0 0
medium auto
encapsulation ip
bind interface eth0 router
no shutdown

port fxo 0 0
encapsulation cc-fxo
bind interface IF_FXO_0 switch
no shutdown

port fxo 0 1
encapsulation cc-fxo
bind interface IF_FXO_1 switch
no shutdown

 

[anonymous]

il problema è che oltre if_lan come rete , lui duplicava in eth0
questo lo si risolve quando si importa la configurazione, non salvare, ma fare il reload

per le chiamate che davano busy, ho rifatto il template ed ho messo di aspettare 2 secondi