NUMERO DEL CHIAMANTE SEMPRE ANONYMOUS

anonymous

Well-Known Member
Registrato
14 Gennaio 2008
Messaggi
19.170
Buongiorno a tutti,
sto configurando un patton 4112 e ho il seguente problem...tutte le chiamate che ricevo vengono interpretate come anonymous...

dallo status del patton sulle chiamate in ingresso ottengo

Active Calls
============
Call Call-Leg State Address Display Charge


00ef91e0
IF_FXO_0/active CONNECTED n/a n/a
IF_SIP_0-00ee9b38/ac CONNECTED n/a n/a


puo' essere che non passi il numero la Telecom ??

per completezza invio anche la configurazione del patton



interface sip IF_SIP_0
bind context sip-gateway GW_SIP_0
route call dest-interface IF_FXO_0
remote 192.168.1.50 5060
early-connect
early-disconnect
address-translation outgoing-call request-uri user-part fix 10003 host-part to-header target-param none

interface sip IF_SIP_1
bind context sip-gateway GW_SIP_1
route call dest-interface IF_FXO_1
remote 192.168.1.50 5060
early-connect
early-disconnect
address-translation outgoing-call request-uri user-part fix 10004 host-part to-header target-param none

interface fxo IF_FXO_0
route call dest-interface IF_SIP_0
loop-break-duration min 60 max 1000
disconnect-signal loop-break
disconnect-signal busy-tone
ring-number on-caller-id
dial-after timeout 2
mute-dialing

interface fxo IF_FXO_1
route call dest-interface IF_SIP_1
loop-break-duration min 60 max 1000
disconnect-signal loop-break
disconnect-signal busy-tone
ring-number on-caller-id
mute-dialing

context cs switch
no shutdown

authentication-service AS_ALL_LINES
realm 1 3CXPhoneSystem
username 10003 password /JnQHcmSE6YbFPZM7XlqvQ== encrypted
username 10004 password jYwpF/gP8rqfr6D/cAveRA== encrypted

location-service LS_10003
domain 1 192.168.1.50

identity-group default

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 10003

identity 10003

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES

registration outbound
registrar 192.168.1.50 5060
lifetime 300
register auto

location-service LS_10004
domain 1 192.168.1.50

identity-group default

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES username 10004

identity 10004

authentication outbound
authenticate 1 authentication-service AS_ALL_LINES

registration outbound
registrar 192.168.1.50 5060
lifetime 300
register auto

context sip-gateway GW_SIP_0

interface LAN
bind interface IF_IP_LAN context router port 5060

context sip-gateway GW_SIP_0
bind location-service LS_10003
no shutdown

context sip-gateway GW_SIP_1

interface LAN
bind interface IF_IP_LAN context router port 5062

context sip-gateway GW_SIP_1
bind location-service LS_10004
no shutdown

port ethernet 0 0
medium 10 half
encapsulation ip
bind interface IF_IP_LAN router
no shutdown

port fxo 0 0
encapsulation cc-fxo
bind interface IF_FXO_0 switch
no shutdown

port fxo 0 1
encapsulation cc-fxo
bind interface IF_FXO_1 switch
no shutdown


Grazie

Marco
 
Io mi accerterei prima che il servizio "Chi è" sia attivo sulla linea collegando semplicemente un telefono con display alla linee e verificando che le chiamate entranti mostrino il Caller ID.
 
ottimo Matteo,
poi mi accerterei di non avere il MAIUSCOLO attivato,
di solito non è gradito in un forum :)

damiano
 
Per il maiuscolo.....pardon !! Mia ignoranza...
 

Inizia con 3CX – Admin

Forum statistics

Discussioni
44.659
Messaggi
233.415
Membri
78.445
Ultimo Iscritto
NordNico